My first Rag Quilt is finished!

Rag Quilt wasn’t something I initially set out to make, in fact, I had no idea what it was until I stumbled upon some videos on Youtube about them. After watching and reading a few tutorials on rag quilts being a good beginner quilt to make, I’m on board, let’s do this!   🤗

The premise of a rag quilt is that you create a quilt sandwich which consists of a front piece on top of an optional smaller piece of batting on top of a back piece, all sewn together corner to corner forming an X. Then each sandwich is sewn together with a 1″ seam allowance turned to the front of the quilt. When all squares in one row is sewn together, then each row is sewn to the next row with proper seam alignment. Once all sandwiched pieces are sewn together, a 1″ seam allowance is sewn around the border of the quilt. After that you’re ready to use your handy Fiskars 8.5 Inch Softouch Spring Action Rag Quilter Snip to cut 1/2″ – 3/4″ snips into that 1″ seam allowance WITHOUT snipping the sewn thread. These snipper scissors are awesome!! :laugh: Sure my hand still cramped after 3 hours of snipping but I suspect it would have been way worse if I didn’t have them. Plus they are sharp and cut through the fabric without problems as long as you’re not trying to cut through 6 layers at the same time.

Here are some pics of my Rag Quilt process:

Making a Quilt Sandwich
Pinning Quilt Sandwich
Chain Piecing Quilt Squares
Sewing together Quilt Sandwiched Squares
Pinning and Clipping together rows of Quilt Squares for sewing
Using Quilt Snips
Snip every 1/2″ apart and 3/4″ deep WITHOUT snipping thread.
Snipping is done!
Finished snipping the Rag Quilt.
After washing and drying twice, it’s all fluffy!
The back of the Rag Quilt looks like a normal quilt.
Printed label here has been washed twice and it still looks great and the qr code still scans!

I ended up washing and drying the rag quilt twice. The first time, it’s important to check the link trap often during the dry cycle to remove the build up of lint. The rag edges really shred in the washing machine and dryer. I read people suggest using a laundromat the first time washing and drying the rag quilt, I can see why. It left a lot of shreds in the washer after the first wash, the second wash was a lot less. The same is true with dryer. First time drying, every 10 minutes you should check the lint trap to remove the lint, there’s a lot! Another good thing to do is to take it outside (so there’s no cleanup inside) and shake the heck out of the quilt to remove shreds/lint after each washing and drying. After washing and drying twice, the edges are getting more “raggy”, I’m sure it will look even better after more washings.

I did have to use a pill remover/fabric shaver to get the cotton pills off of the quilt. It seems that the nursery cotton flannel tends to fuzz up and pill. I just want it to look best for presenting since it’s a gift.  😊

Here’s the pertinent info about this rag quilt:

Baby Rag Quilt
Made for: My new nephew Bo
Pieced, Sewn, Quilted by: Jean Eng
Location: Baltimore, Maryland, USA
Date: February 2015
Materials Used:
Front & Back: 100% Nursery Cotton (flannel)
Batting: 100% Cotton Warm and Natural Cotton Quilt Batting
Thread: Polyester
Label: 100% Cotton

All in all, I’m happy with the way it turned out. It’s a lot of cutting, sewing, and snipping but in the end, it produced a nice looking quilt. I think moving forward, I would use regular cotton, not flannel cotton for making this type of quilt. Regular cotton being thinner may make it easier to work with and may rag better too. I would also cut my squares bigger for adult size quilts, this was cut with 7″ squares and 5″ batting squares. I may go 10″ with 8″ batting next time.

Jean

Printing labels on fabric, trial, error, finally success…

After many trials and errors, I finally got my labels printed on fabric for the quilts I’m making! It’s been a huge learning curve on making quilts and my initial attempt at just handwriting the labels with fabric pens proved to be not as appealing as I had hoped. Turns out that writing on fabric is not quite so easy nor legible.

I read through numerous websites that described the process which many included temporarily adhering by ironing your fabric piece to freezer paper for a backing so you can run it through your printer. The freezer paper gave it some thickness and weight and formed a stiffer piece of fabric to feed into your printer. I didn’t try this with freezer paper but I did copy the same idea and used a product by Pellon called Fuse-N-Tear Stabilizer which is a stabilizer you iron on to the back of your fabric to stiffen it up for machine embroidering. I bought this stabilizer initially to test out the monogramming feature on my sewing machine to see if I could do a simple label. Many sample tests proved that monogramming feature is not a viable option for producing a small label that looked ok enough to not embarrass me. Since I bought 12 yards of the stabilizer, I put it to good use!  :laugh:

The next hurdle was getting the printer ink to set without washing away. This was again not an easy task. My main printer is an old inkjet HP Photosmart. It prints fine and I’m familiar with it so I was able to create 4″x6″ stabilized fabric pieces to run through the printer using the built in 4×6 tray. I did the whole let it dry, heat set the ink with iron, soak it in vinegar to supposedly further set the ink, a quick rinse in water and allow to dry. Result was that most of the ink would run and washed away.

Just printing and let dry, wash it and the ink disappeared. Printing and heat set with iron also washed off most of the ink, it left a greenish trace of what the printing looked like from black ink. Heat set and then soaked in vinegar didn’t make much of a difference than the previous method. I wonder if I can just skip this step altogether with labels I eventually printed with success.

The problem with the ink running isn’t so much the methods I used but rather with the type of ink I had in my printer. It turns out that pigment ink is what sticks around while dyed ink will just wash away. Pigment ink is the more permanent ink which also equate to the higher price tag on ink cartridges, it’s said to be non-yellowing, archival, and doesn’t fade over time, typically seen in photo printing. Even though my HP printer will do great photo printing, it doesn’t use pigment ink, it’s dyed. There is also a product called Bubble Jet Set and Bubble Jet Rinse to help set ink to fabric by prepping the fabric to take the ink better. I didn’t want to go that route with extra work and expense until absolutely necessary, plus I’d rather limit my use of chemicals and use more natural products.

I was beginning to think nothing about this whole quilting project is ever going to be easy and go smoothly. But I kept going because being able to print the label means that I can graphically produce a nice looking fancier label with all the bells and whistles of modern day technology and hopefully doesn’t continue to add to my growing sewing costs, I have spent WAY too much money on all things sewing related. 😛

After scouring the web for a solution to my new problem, reading countless forum threads, watching dozens of youtube videos, and sifting through numerous blog comments, not to mention the constant brainstorming I endured to figure out a way to make it work in the most cost effective way, I realized that I have an even older piece of crap Epson cheapo printer that came bundled with some computer purchase my brother made many moons ago. The only reason I have kept this printer is because it has a photocopy feature that doesn’t need to be hooked up to a computer to work. Every tax season I dredge it out to make copies of forms and documents and it barely works. The ink is super expensive and it runs out fast, it doesn’t print very well and it’s completely finicky and slow. BUT Epson inks are supposedly pigment ink! So my brilliant idea was to see if I can use it print up a label.

Sounds easy enough…. After realizing that despite a 3/4 full black ink cartridge, if the other 3 color cartridges are empty, this printer simply will not operate at all. And I wasn’t about to fork out $15+ for each of the 3 cartridges on this printer to see if using it for printing on fabric is an option. So I had another brilliant idea! :yes:  I’ll just buy some cheapo refilled ink from Amazon.com for this printer and swap out the empty color ink cartridges with non-genuine Epson ink but use the genuine black Epson ink that’s pigmented to do my fabric label printing! I ended up getting the 12pk for $15, it was cheap enough to test. If it works and for some reason I want to do color labels down the road, I can always fork out the cash but I seriously doubt it. I can always use the cheap ink for printing on paper.

Two, maybe three days I spent messing with the printer after the ink arrived. The trick of swapping out the cartridge did work, the printer would pop up with a dialogue about recognizing that I’m not using genuine Epson ink…um, whatever! Running the clean nozzle and head 4 times finally produced a cleaner looking image on paper. The true test is on the fabric. I had paper jams, errors and more errors, slow response, non-response…this printer just doesn’t play nice at all :pain:  but after numerous threats of its impending death by a second story window toss, it began to cooperate! I’ve learned a few things about this printer’s massive limitations and have finessed it within it’s parameters to produce a decent looking label. The Genuine Epson Ink doesn’t seem to wash off at all in water or through laundering, YES!!!

I still created my stabilized backing in the standard 8.5×11 size but I would cut out 4×6 size fabric pieces to iron onto the backing along with filler fabric for the empty spots. This way I can do my graphic design in a 4×6 environment and print it off on different sections of the page without wasting a full 8.5×11 piece of fabric. It peels off easy and I can reuse it a few times by ironing a new 4×6 piece to replace the one I printed and peeled off. Less waste is joyous!

I’m really happy with the way the labels came out. I used a white 100% cotton muslin fabric and the black ink really popped. I did set it in a pan of vinegar to supposedly set the ink more after I heat set it with the iron for 15-20 seconds for a few rounds. I did test with vinegar and without, frankly I can’t tell the difference. Neither washed off in soap and water and both looked similar without fading. If the Epson ink didn’t work out, my next option was to get a lower end Canon PIXMA as I read others have had success using a Pixma. Glad I didn’t have to spend more money now than I did, I’m sure my husband is happy too! Eventually it would be nice to get a newer wireless photo printer, but for now, this will do.

Check out my new quilt label printed on fabric:

Sections of fabric fused onto 8.5″x11″ stabilizer for fabric printing
printed quilt label
Printed fabric label sewed to a quilt square, how cute is that?
Printed fabric label sewn into the quilt, looks awesome!
Printed label here has been washed twice and it still looks great and the qr code still scans!

One of the big pluses to printing your own labels on fabric is that you can customize it however you want, whether it’s on a page of labels or each individual one. Here I have decided that since starting out with my sewing projects and quilt making that it’s a nice idea to label them with different unique QR codes that reference a shorten url to a page that talks about that particular sewing project. The reason for my own vanity shorten url site is to have more control over all my links. The shorter the url, the less complicated the QR code graphic will look. On fabric, a less busy qr code graphic may be more important than on paper.

I have read that quilt labels are very important to give a history of when, where, why and by whom the quilt was made, linking to a page is an extension of that, to give a fuller background. Despite the week I’ve had, it’s been a good learning experience and I’m very happy at the final results! 😄

Jean

I made my first quilt for my new baby nephew Bo!

I’m so excited on the new addition to the family! He’s living in a cold climate and what’s better to welcome baby Bo into the world than a snuggly baby quilted blanket? Well, I guess warmer weather would also be nice, I suppose.

Over the holidays I got a new Brother XR1355 Computerized 130-Stitch Sewing & Quilting Machine and so my current joy is learning how to sew. It’s computerized and works great, plus I got it at Costco at a really good price too! It’s leaps and bounds better than the sewing machine my mom has (probably 20+ years old) that I would sometimes borrow to make pillows or fix ripped seams. That’s about the extent of my previous sewing abilities, throw pillows and mending clothes.

I contemplated on getting a nicer sewing machine that I could grow with that can do embroidery but I didn’t have an extra $250+ bucks on top of what I already paid sitting around to buy a better one. Besides, I wasn’t sure how much use I’d get on it since I didn’t sew that often. Well, truth be told, I’m hooked on sewing and learning how to sew various different things I use, it’s actually really fun, frustrating at times but fun! Time consuming but fun! I’ve stuck myself so many times with pins but still fun!   😊

So far I’ve made pin cushions since I needed one (or 5). I’ve also made a draft stopper for my mom’s basement door, she was (is) using just a towel to keep the draft out, I haven’t given it to her yet. I love picking up random nice remnant home decor fabric just to use for stuff like this….and throw pillows. I also have made dog bed pads and cushy pad for the dog crate. Oh, I did make some dog booties but that will be another post. I had this crazy idea to make a baby quilt while my sister in law was pregnant. I didn’t tell her what I was planning to do since I wasn’t sure if I can pull it off.

My first attempt at making a quilt has been a challenge. There is so much information online and I must’ve watched 2 dozen youtube videos on quilt making and spent hours reading tutorials and gawking at pictures of baby quilts. Well, they don’t call it home made for nothing…it’s definitely not perfectly stitched straight and I’m learning as I’m going. Initially I wanted to make a regular quilt but then I saw these rag quilts that looked interesting and had read they may be a good beginner first quilt to attempt. So I did a bunch of research and did some calculations and set out to cut out all my squares, front squares, back squares, and inside batting. It took a long time to pick out the fabrics and took longer to cut them all out, and even longer to figure out how I want them placed. Then I realized that I actually had enough fabric to do two quilts so one would be more of a thinner blanket and the other is thicker with batting. Back to the store for other materials, buying fabric is addictive, I think I may have a problem…

I ended up using some extra squares of fabric to make a super cute quilted pillow to go with the quilts. I wasn’t sure if it would be cute, it was an envelope style and first time piecing quilt squares together so it was either going to be a major disaster or the cutest pillow ever! Glad it was the latter.   🤗

quilted baby pillow
Quilted Baby Pillow
back of quilted baby pillow envelope style
Back of Quilted Baby Pillow Envelope Style

It was really good practice for me and I also did a rag quilt sample to see how it looks. I haven’t started on sewing the pieces of squares together for that quilt but have all the squares cut out. I hope it goes smoother than the quilted blanket I almost finished last night. I spent most of the day working on it, pinning and repinning. The snuggle fabric (minky type) I bought was hard to work with since it’s so soft and stretchy. Any mistakes I made sewing where the backing fabric bunched up slightly, the seams had to be ripped out and resewn. I think it took 3 times longer to rip the seams out than it did to sew it in the first place. And I learned a lot working with that material….the main thing I learn is to not use it, haha.

Here’s what I learned about working with snuggle fabric:

  • Always use a rotary cutter for cleaner, less snowy cuts of this fabric.
  • Always cut the fabric slightly bigger than the front piece by at least 1 inch all around. I made the mistake of cutting it to the same size and when it pulls and stretches, it totally was skewed. No matter how many pins (straight and basting pins) I stuck in the fabric to hold it in place, it would shift and lay slightly crooked by the time I got down to the bottom.
  • When “quilting” the front and back together, never pull, stretch, lay the weight of the blanket off the table where it will leave you with extra back fabric. I learned that the hard way. I sewed a line down the middle, and then a cross line intersecting. Well the intersecting line bunched and i overlapped my sewing. Taking out stitches from the snuggle fabric side is a major pain in the ass. I think it literally took me an hour or more to remove those two lines. The next go around, I relaxed the fabric all around and not force anything. I let it feed through slowly. I’m probably not the best person to explain this. Sewing 9 lines through the quilt took me hours to do and it was ok once I was painstakingly done.

After all that, I realized that the super cool looking multi-toned blue thread I bought was really sewn all over the place and very visible against the lighter patches of fabric. Oops! On the pillow, I used a cream color thread and it barely showed my mistakes. Blue thread was probably not the best choice and I didn’t really notice how terrible my lines were until I was done.   😩  Hey, they don’t call it handmade for nothing! I can find other things to obsessed over, like the label (sigh).

basting quilt
Basting the Quilt Sandwich together, so much sewing and pressing
quilted baby blanket
The almost finished Quilted Baby Blanket
snuggle minky fabric back on baby quilt
Snuggle (Minky) Fabric back on Baby Quilt
baby blanket and pillow set
Baby Blanket and Pillow Set

In that last pic, you can kind of see what I mean about the blue thread seams on the blanket vs the white thread on the pillow. For my first quilt, it didn’t turn out too bad, it’s cute 😊

Last night I was obsessing over labeling the quilt. I did add a label after the fact that was hand written with fabric ink on white cotton but I am rethinking it and testing a printed version. I just have to figure out how to make the ink not bleed nor fade from laundering. I have an idea of using a qr code on the label to correspond to the blog post that talks about that particular quilt so if you found me by scanning the qr code on a quilt label, yay, it must’ve worked! Here’s the pertinent facts about this quilt:

Quilted Baby Pillow
Made for: My new nephew Bo
Pieced, Sewn, Quilted by: Jean Eng
Location: Baltimore, Maryland, USA
Date: February 2015
Materials Used:
Front & Back: 100% Nursery Cotton (flannel)
Pillow Form: 100% Cotton
Pillow Fill: Poly-Fil
Thread: Polyester
Envelope Style Pillow case is removable for laundering

Quilted Baby Blanket
Made for: My new nephew Bo
Pieced, Sewn, Quilted by: Jean Eng
Location: Baltimore, Maryland, USA
Date: February 2015
Materials Used:
Front: 100% Nursery Cotton (flannel)
Back: Snuggle/Minky Fabric (polyester)
Label: 100% Cotton
Thread: Polyester

 

separator

Thanks for visiting!

Jean